leads4pass has updated HP HPE0-V14 dumps issues! The latest HPE0-V14 exam questions can help you pass the exam! All questions are corrected to ensure authenticity and effectiveness! Download the leads4pass HPE0-V14 VCE dumps or PDF dumps: https://www.leads4pass.com/hpe0-v14.html (Total Questions: 201 Q&A HPE0-V14 Dumps)
Examdad Exam Table of Contents:
[FREE PDF] Free HP HPE0-V14 pdf dumps download from Google Drive: https://drive.google.com/file/d/1VzIAgMiMDXoTy2oceecGgqBpzkmOfgz-/
QUESTION 1
What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385
Gen10 server?
A. Disk Drives
B. Power Supplies
C. Network Cards
D. Processors
Correct Answer: A
Reference: https://www.servethehome.com/hpe-proliant-dl385-gen10-released/
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_USanddocId=emr_na-a00039162en_us
QUESTION 2
You are creating a configuration for a new Nimble HF40 array.
Which tool should you use to ensure that you include adequate cache in the configuration?
A. HPE NinjaSTARS
B. HPE Storage Sizer
C. HPE OneView
D. HPE SPOCK
Correct Answer: A
QUESTION 3
A customer requires a management solution that will provide email notifications if hardware errors occur on their
servers. Which management solution provides this functionality?
A. UEFI System Configuration
B. iLO Advanced Edition
C. HPE SUM
D. HPE SUT
Correct Answer: B
Reference: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_USanddocId=emr_na-a00026111en_us
QUESTION 4
A customer needs to verify inbound packet statistics for the interface. Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric
5900 series switch used by an iSCSI storage array. Which command can be used in the CLI to perform this operation?
A. show inbound counters port 1/0/10
B. display counters inbound interface Ten-GigabitEthernet 1/0/10
C. display all statistics from port 1/0/10
D. interface Ten-GigabitEthernet 1/0/10 show counters
Correct Answer: D
QUESTION 5
A customer has the following requirements:
1.
two or more 10Gb SFP+ uplinks
2.
downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables
3.
24 downlink ports
Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?
A. HPE Switch Selector
B. HPE NinjaSTARS
C. HPE SAF
D. HPE SPOCK
Correct Answer: D
QUESTION 6
DRAG DROP
Match each characteristic to the correct storage type.
Select and Place:
Correct Answer:
Reference:
https://www.excitingip.com/1358/jbod-just-a-bunch-of-disks/
https://www.enterprisestorageforum.com/storage-networking/nas-vs.-san-differences-and-use-cases.html
QUESTION 7
A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.
Which feature of this server will assist the customer with the initial Windows installation?
A. HPE SSA Diagnostics
B. HPE SmartStart
C. Smart Storage Administrator
D. Intelligent Provisioning
Correct Answer: D
Reference: https://community.hpe.com/t5/Alliances/Get-HPE-Gen10-Servers-with-Windows-Server-2019-up-andRunning-in/ba-p/7066128#.XnxeVG5RWQ4
QUESTION 8
Refer to the exhibit.
When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the
exhibit showing the complete zoning configuration of one of the HPE SN3000B switches. What should you do to ensure
storage access is not interrupted when doing the next update?
A. Create and ISL between the two HPE SN3000B switches.
B. Create a new zone for ESX1 and the second storage controller.
C. Change the timeout values on the SN3000B switch.
D. Configure the same zone on a second HPE SN3000B.
Correct Answer: C
QUESTION 9
A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type.
The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are
part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?
A. Switch A: Active; Switch B: Active
B. Switch A: Active; Switch B: Passive
C. Switch A: Passive; Switch B: Passive
D. Switch A: Passive; Switch B: Active
Correct Answer: C
QUESTION 10
Refer to the exhibit.
A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible
network throughput. Given the BOM in the exhibit, what do you need to add to this server to meet the customer
requirement?
A. Workload Accelerator
B. SSD Drives
C. Smart Storage Hybrid Capacitor
D. Secondary Riser Kit
Correct Answer: C
QUESTION 11
DRAG DROP
Match the characteristic to the correct HPE ProLiant family.
Select and Place:
Correct Answer:
QUESTION 12
What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup
system and its capabilities without emulation?
A. Recovery Manager Central
B. Catalyst Target
C. Virtual Tape Library
D. NAS Target
Correct Answer: A
Reference: https://www.hpe.com/emea_europe/en/storage/rmc-backup.html
QUESTION 13
DRAG DROP Refer to the exhibit
A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity. The
customer is now experiencing performance issues.
Identify the correct components to upgrade the network connections and improve performance on the left. Then drag
those components to the answer area on the right. (Choose three.)
Select and Place:
Correct Answer:
leads4pass has 7 years of exam experience! A number of professional HP exam experts! Update exam questions throughout the year! The most complete exam questions and answers! The safest buying experience! The greatest free sharing of exam practice questions and answers!
Our goal is to help more people pass the HP exam! Exams are a part of life, but they are important! In the study, you need to sum up the study! Trust leads4pass to help you pass the exam 100%!
Summarize:
This blog shares the latest HP HPE0-V14 exam dumps, HPE0-V14 exam questions and answers! HPE0-V14 pdf, HPE0-V14 exam video!
You can also practice the test online! leads4pass is the industry leader!
Select leads4pass HPE0-V14 exams Pass HP HPE0-V14 exams “Building HPE Hybrid IT Solutions”. Help you successfully pass the HPE0-V14 exam.
ps.
Get HP Full Series Exam Dumps: https://www.exammarkers.com/?s=HP (Updated daily)
Get leads4pass HPE0-V14 exam dumps: https://www.leads4pass.com/hpe-atp-hybrid-it-solutions-v2.html
Latest update leads4pass HPE0-V14 exam dumps: https://www.leads4pass.com/hpe0-v14.html (201 Q&As)
[Q1-Q12 PDF] Free HP HPE0-V14 pdf dumps download from Google Drive: https://drive.google.com/file/d/1VzIAgMiMDXoTy2oceecGgqBpzkmOfgz-/