Latest Cisco CCDP 300-101 dumps exam training resources in PDF format free download from leads4pass. New Cisco CCDP 300-101 dumps pdf materials and vce youtube demo update free shared. “Implementing Cisco IP Routing” is the name of Cisco CCDP https://www.leads4pass.com/300-101.html exam dumps which covers all the knowledge points of the real Cisco exam. Useful Cisco CCDP 300-101 dumps exam practice questions and answers download free try, 100% success and guarantee to pass Cisco 300-101 exam.

With the help of latest and authentic Cisco CCDP 300-101 dumps exam practice questions, you can find the best useful Cisco 300-101 dumps exam preparation kit here from leads4pass and you will also get the 100% success and guarantee for passing the Cisco 300-101 exam.

Google drive latest Cisco 300-101 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRWFlVNGtTZjU1MVE

Google drive latest Cisco 300-115 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VROUdnZWRYLTJta1E

Cisco CCDP 300-101 Dumps Exam Real Questions And Answers (1-30)

QUESTION 1
A network engineer executes the show ip cache flow command. Wich two types of information are displayed in the report that is generated? (Choose 2)
A. top talkers
B. flow export statistics
C. flow sample for specific protocols
D. MLS flow traffic
E. IP packet distribution
Correct Answer: CE

QUESTION 2
At which layer does Cisco Express Forwarding use adjacency tables to populate addressing information?
A. Layer4
B. Layer 2
C. Layer 1
D. Layer 3
Correct Answer: B

QUESTION 3
Which traffic does the following configuration allow? ipv6 access-list cisco permit ipv6 host 2001:DB8:0:4::32 any eq ssh line vty 0 4 ipv6 access-class cisco in
A. all traffic to vty 0 4 from source 2001:DB8:0:4::32
B. only ssh traffic to vty 0 4 from source all
C. only ssh traffic to vty 0 4 from source 2001:DB8:0:4::32
D. all traffic to vty 0 4 from source all
Correct Answer: C

QUESTION 4
Refer to the exhibit. 300-101 dumps Will redistributed RIP routes from OSPF Area 2 be allowed in Area 1?

A. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.
B. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.
C. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.
D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.
E. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.
Correct Answer: A

QUESTION 5
Refer to the exhibit.

If R1 is configured for 6to4 tunneling, what will the prefix of its IPv6 network be?
A. 1723:1100:1::/48
B. FFFF:AC1F:6401::/16
C. AC1F:6401::/32
D. 2002:AC1F:6401::/48
E. 3FFE:AC1F:6401::/32
Correct Answer: D

QUESTION 6
Refer to the exhibit.

A new TAC engineer came to you for advice. A GRE over IPsec tunnel was configured, but the tunnel is not coming up.
What did the TAC engineer configure incorrectly?
A. The crypto isakmp configuration is not correct.
B. The crypto map configuration is not correct.
C. The network 172.16.1.0 is not included in the OSPF process.
D. The interface tunnel configuration is not correct.
Correct Answer: D

QUESTION 7
Which two methods of deployment can you use when implementing NAT64? (Choose two.)
A. stateless
B. stateful
C. manual
D. automatic
E. static
F. functional
G. dynamic
Correct Answer: AB

QUESTION 8
Which statement about dual stack is true?
A. Dual stack translates IPv6 addresses to IPv4 addresses.
B. Dual stack means that devices are able to run IPv4 and IPv6 in parallel.
C. Dual stack translates IPv4 addresses to IPv6 addresses.
D. Dual stack changes the IP addresses on hosts from IPv4 to IPv6 automatically.
Correct Answer: B

QUESTION 9
The following configuration is applied to a router at a branch site: ipv6 dhcp pool dhcp-pool dns-server 2001:DB8:1:B::1 dns-server 2001:DB8:3:307C::42 domain-name example.com ! If IPv6 is configured with default settings on all interfaces on the router, which two dynamic IPv6 addressing mechanisms could you use on end hosts to provide end-to-end connectivity? (Choose two.)
A. EUI-64
B. SLAAC
C. DHCPv6
D. BOOTP
Correct Answer: AB

QUESTION 10
Which two statements about EVN are true? 300-101 dumps (Choose two)
A. Virtual network tags are assigned per-VRF.
B. it is supported only on access ports.
C. Virtual network tags are assigned globally.
D. Routing metrics can be manipulated only from directly within the routing-context configuration.
E. The VLAN ID in the 802.1q frame carries the virtual network tag.
F. The VLAN ID is the ISL frame carries the virtual network tag.
Correct Answer: AE

QUESTION 11
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Correct Answer: D

QUESTION 12
Which two options are requirements for EIGRP authentication? (Choose two)
A. A crypto map must be configured.
B. The Authentication key must be configured under the interface running EIGRP.
C. The authentication key must be configured within the EIGRP routing configuration.
D. The authentication key IDs must match between two neighbors.
E. A separate key chain must be configured.
F. AN IPsec profile must be configured.
Correct Answer: BD

QUESTION 13
Which of the following is a GRE Tunnel characteristic?
A. GRE impose more CPU overhead than IPSec on VPN gateways
B. GRE tunnels can run through IPsec tunnels.
C. GRE Tunnel doesn\’t have support for IPv6
D. GRE consists of two sub-protocols: Encapsulated Security Payload (ESP) and Authentication Header (AH).
Correct Answer: B

QUESTION 14
A network engineer has been asked to ensure that the PPPoE connection is established and authenticated using an encrypted password. Which technology, in combination with PPPoE, can be used for authentication in this manner?
A. PAP
B. dot1x
C. IPsec
D. CHAP
E. ESP
Correct Answer: D

QUESTION 15
Refer to the exhibit.

Which statement is correct regarding the operation of NAT-PT between the IPv4 and IPv6 networks shown?
A. The router will determine the IPv4 destination address.
B. The source IPv6 host can use DNS to determine the IPv6-to-IPv4 address mapping.
C. The host is statically configured with the IPv6-to-IPv4 address mapping.
D. ICMP can be used to determine the IPv6-to-IPv4 address mapping.
Correct Answer: B

QUESTION 16
Refer to the exhibit.

Which interoperability technique implemented on the router would allow Host-1 to communicate with Host-2?
A. Dual Stack
B. NAT-PT
C. 6to4 tunnel
D. GRE tunnel
E. ISATAP tunnel
Correct Answer: B

QUESTION 17
A network engineer executes the andquot;ipv6 flowsetandquot; command. What is the result?
A. Flow-label marking in 1280-byte or larger packets is enabled.
B. Flow-set marking in 1280-byte or larger packets is enabled.
C. IPv6 PMTU is enabled on the router.
D. IPv6 flow control is enabled on the router.
Correct Answer: A

QUESTION 18
Which two statements are true about using IPv4 and IPv6 simultaneously on a network segment? (Choose two.)
A. Hosts can be configured to receive both IPv4 and IPv6 addresses via DHCP.
B. Host configuration options for IPv4 can be either statically assigned or assigned via DHCP.Host configuration options for IPv6 can be statically assigned only.
C. IPv6 allows a host to create its own IPv6 address that will allow it to communicate to other devices on a network configured via DHCP. IPv4 does not provide a similar capability for hosts.
D. IPv4 and IPv6 addresses can be simultaneously assigned to a host but not to a router interface.
E. IPv6 provides for more host IP addresses but IPv4 provides for more network addresses.
Correct Answer: AC

QUESTION 19
A network engineer enables OSPF on a Frame Relay WAN connecton to various remote sties, but no OSPF adiacencies come up. 300-101 dumps Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-murpont under WAN interface
B. Enable virtual Iinks
C. Change the networktype to nonbroadcast mutpoint access
D. Configure the neighbor command under OSPF process for each remote site
E. Ensure that the OSPF process number matches among all remote sites
Correct Answer: AD

QUESTION 20
The OSPF database of a router shows LSA types 1, 2, 3, and 7 only. Which type of area is this router connected to?
A. stub area
B. totally stubby area
C. backbone area
D. not-so-stubby area
Correct Answer: D

QUESTION 21
Which of the below mentioned conditions form a neighbor relationship in EIGRP? (Choose three)
A. Hello or ACK received
B. AS number match
C. Hello timer match
D. Identical metric (k values)
E. Dead Timer Match
Correct Answer: ABD

QUESTION 22
Refer to the exhibit.

Given the partial configuration in the exhibit, which IPv6 statement is true?
A. The configuration is an example of an encrypted IPv6 VPN tunnel.
B. The configuration is an example of a one to one IPv6 tunnel.
C. The configuration is an example of a 6to4 tunnel.
D. The configuration is an example of a 4to6 tunnel.
Correct Answer: C

QUESTION 23
Refer to the exhibit.

Which two statements are correct regarding the routes to be redistributed into OSPF? (Choose two.)
A. The network 192.168.1.0 will be allowed and assigned a metric of 100.
B. The network 192.168.1.0 will be allowed and assigned a metric of 200.
C. All networks except 10.0.0.0/8 will be allowed and assigned a metric of 200.
D. The network 172.16.0.0/16 will be allowed and assigned a metric of 200.
E. The network 10.0.10.0/24 will be allowed and assigned a metric of 200.
Correct Answer: AD

QUESTION 24
Which Cisco VPN technology uses AAA to implement group policies and authorization and is also used for the XAUTH authentication method?
A. DMVPN
B. Cisco Easy VPN
C. GETVPN
D. GREVPN
Correct Answer: B

QUESTION 25
Which three benefits does the Cisco Easy Virtual Network provide to an enterprise network? 300-101 dumps (Choose three.)
A. simplified Layer 3 network virtualization
B. improved shared services support
C. enhanced management, troubleshooting, and usability
D. reduced configuration and deployment time for dot1q trunking
E. increased network performance and throughput
F. decreased BGP neighbor configurations
Correct Answer: ABC

QUESTION 26
Which command must be globally enabled on a Cisco router to support IPv6?
A. ip routing ipv6
B. ipv6 unicast-routing
C. ipv6 routing
D. ip classless
E. ipv6 cef
Correct Answer: B

QUESTION 27
What does the following access list, which is applied on the external interface FastEthernet 1/0 of the perimeter router, accomplish? router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log router (config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log router (config)#access-list 101 deny ip 172.16.0.0 0.15.255.255 any log router (config)#access-list 101 permit ip any any router (config)#interface fastEthernet 1/0 router (config-if)#ip access-group 101 in
A. It prevents incoming traffic from IP address ranges 10.0.0.0-10.0.0.255, 172.16.0.0- 172.31.255.255, 192.168.0.0-192.168.255.255 and logs any intrusion attempts.
B. It prevents the internal network from being used in spoofed denial of service attacks and logs any exit to the Internet.
C. It filters incoming traffic from private addresses in order to prevent spoofing and logs any intrusion attempts.
D. It prevents private internal addresses to be accessed directly from outside.
Correct Answer: C

QUESTION 28
Which statement describes what this command accomplishes when inside and outside interfaces are correctly identified for NAT?
ip nat inside source static tcp 192.168.1.50 80 209.165.201.1 8080 extendable
A. It allows host 192.168.1.50 to access external websites using TCP port 8080.
B. It allows external clients coming from public IP 209.165.201.1 to connect to a web server at 192.168.1.50.
C. It allows external clients to connect to a web server hosted on 192.168.1.50.
D. It represents an incorrect NAT configuration because it uses standard TCP ports.
Correct Answer: C

QUESTION 29
Which method allows IPv4 and IPv6 to work together without requiring both to be used for a single connection during the migration process?
A. dual-stack method
B. 6to4 tunneling
C. GRE tunneling
D. NAT-PT
Correct Answer: A

QUESTION 30
After you review the output of the command show ipv6 interface brief, you see that several IPv6 addresses have the 16-bit hexadecimal value of andquot;FFFEandquot; inserted into the address. Based on this information, what do you conclude about these IPv6 addresses?
A. IEEE EUI-64 was implemented when assigning IPv6 addresses on the device.
B. The addresses were misconfigured and will not function as intended.
C. IPv6 addresses containing andquot;FFFEandquot; indicate that the address is reserved for multicast.
D. The IPv6 universal/local flag (bit 7) was flipped.
E. IPv6 unicast forwarding was enabled, but IPv6 Cisco Express Forwarding was disabled.
Correct Answer: A

Why Select Lead4 pass?

High quality IT learning materials offered by the best provider leads4pass. From the following picture, you can see there is a difference between leads4pass and other brands. Other brands started earlier, but the questions are not the latest and it is very expensive. leads4pass provide the cheapest and newest questions with high pass rate.

High quality Cisco CCDP 300-101 dumps pdf practice files and study guides free download from leads4pass. The best and most updated latest Cisco CCDP https://www.leads4pass.com/300-101.html dumps pdf training resources which are the best for clearing 300-101 exam test, and to get certified by Cisco CCDP, download one of the many PDF readers that are available for free with high pass rate.

The Following Are Some Reviews From Our Customers:

You can click here to have a review about us: https://www.resellerratings.com/store/leads4pass